llm
Answered on
The self-referencing effect refers to people's tendency to better remember information when the information is about them.
Related Questions
- Suppose the coefficient of static friction between a quarter and the back wall of a rocket car is 0.330. At what minimum rate would the car have to accelerate so that a quarter placed on the back wall would remain in place?
- A glass object receives a positive charge of +3 nC by rubbing it with a silk cloth. In the rubbing process have protons been added to the object or have electrons been removed from it?
- A conducting loop with a radius r = 0.1 m carries a current I = 2 A and has a magnetic moment \vec{\mu} oriented entirely in the j-hat direction. The loop is placed in a magnetic field \vec{B} = [3i-hat + 4j-hat] T. What is the loop's potential energy in this configuration?
- Which best describes the history of scientific knowledge?
- A block with a mass of 2.00 kg is placed against a spring on a frictionless incline at an angle of 30 degrees. The block is not attached to the spring. The spring, which has a spring constant k of 19.6 N/cm, is compressed by 20 cm and then released. (a) What is the elastic potential energy of the compressed spring? (b) What is the change in gravitational potential energy of the block-Earth system as the block moves from the release point to its highest point on the incline? (c) How far along the incline is the highest point from the release point?
- 1. Laser beam with wavelength 632.8 nm is aimed perpendicularly at opaque screen with two identical slits on it, positioned horizontally, and close enough so that both of them fall in the beam cross section. By shifting vertically the screen, each slits can be illuminated independently, allowing the other to be disregarded. On an observation screen positioned 1m further from the opaque screen, the diffraction patterns from the independent slit illumination were found identical, with minima 6.5 mm apart. The interference pattern maxima from simultaneous illumination of both slits were 0.53 mm apart. What are the double slit characteristics (slit width, slit separation)
- surveyor is using a magnetic compass 8.3 m below a power line in which there is a steady current of 120 A. (a) What is the magnetic field in microteslas at the site of the compass due to the power line? (b) Will this field interfere seriously with the compass reading? The horizontal component of Earth’s magnetic field at the site is 20 µT.
- Which of the following is an example of a reversible process? A hand pump is rapidly compressed and the pressure and temperature in the pump rise. The pump is held in position as the temperature drops to the ambient temperature. A car engine burns fuel to produce motion of the car and exhausts the 140°C waste products of the combustion into the 20°C atmosphere. An ice cube at 0°C melts while in a water bath at 0°C. A stick of dynamite explodes. A high pressure air tank at room temperature has its valve opened and the gas in the tank rushes out until the pressure in the tank is equal to atmospheric pressure.
- Which of the following is extrusive? A) magma B) lava C) laccolith D) batholith
- during the first 50s a truck traveled at constant speed of 25m/s . Find the distance that it traveled